Setting up the SoClean with Respironics System One
To set up SoClean with the Respironics System One, you will need the SoClean CPAP Adapter & Diffuser but will only use the diffuser for this system. First, detach the short hose, then attach the diffuser to the stem on the inside of the injection fitting. Lastly, feed the diffuser down into your reservoir, attach the injection fitting to the reservoir, and attach the CPAP hose. Cleaning your CPAP is so easy with SoClean!
STEP ONE
Detach the short hose from the inner stem of the injection fitting.
STEP TWO
Attach the diffuser to the stem on the inside of the injection fitting. You may use a little water as a lubricant to make it easier.
STEP Three
Open the reservoir lid.
STEP FOUR
Feed the diffuser down into your reservoir through the port until the clear plastic end rests at the bottom of the reservoir.
STEP FIVE
Attach the injection fitting to the CPAP hose port.
STEP SIX
Close the reservoir lid.
STEP SEVEN
Attach the CPAP hose to the injection fitting.
That's it! You are now ready to use the SoClean.
